Press the power button on the right side of your MINI by orderbird and hold it for a few seconds. The device is starting, the display lights up, and the card slot at the bottom glows blue.
Press the power button and hold it for a few seconds. Tap on "Power off" and tap again to confirm. Your device will shut down.
Press the power button and hold it for a few seconds. Tap on "Reboot" and tap again to confirm. Your device will reboot. This takes a few minutes.
You can adjust the volume of the MINI by orderbird using the two large buttons on both sides of the device - left for quieter, right for louder. Or press the on/off button for about 2 seconds and use "Sound" to choose between "Sound", "Vibration" and "Silent".
Connect the USB cable to the charger. Plug the micro USB connector into the MINI by orderbird on the left.
Note: When turning the MINI by orderbird to your customer for card payments, please make sure that you disconnect the cable or that there is little tension on the cable. This extends the cable and port life immensely.