You have a problem printing your receipts? Here you will find the possible scenarios and the solution:
The receipt is empty
Are you using thermal paper? The thermal printer is using means of heat to print, which is only possible on thermal paper.
Check if the receipt roll is inserted correctly! Pay attention to the illustration in the receipt roll slot.
Via [Menu] > [Transactions] you can view the receipt and print it again:
Possibly an unclean tear-off edge got stuck. Open the paper slot, take the receipt roll out and insert it again, so that the paper hangs out approx. 1 cm.
You can print the receipt again via [Main menu] > [Transactions]:
Receipt printed too pale
Open the paper slot and carefully clean the top side with a small soft brush or a clean (!) soft toothbrush or a cotton swab.
Sometimes the printer has to warm up a bit. After a few prints, the writing will be clearly visible again.
If you see a small printer icon at the top left of the screen, it means that there is still a print job in progress. Just be patient - as soon as the process is finished, the printer will work again.
Until then, you can send the invoices to the customers via MY orderbird by email. You can find instructions here: Send invoices by email.